Original
By certification 
Sintered Titanium Filter Tube
About sintered titanium filter tube:
This product has excellent properties such as corrosion resistance, high temperature resistance, high strength, easy to ensure filtration accuracy, easy regeneration, etc .; the titanium filter is formed by titanium powder formed and sintered at high temperature, so the surface particles are not easy to fall off; the use temperature in air can be Up to 500 ~ 600 ℃; suitable for the filtration of various corrosive media, such as: hydrochloric acid, sulfuric acid, hydroxide, seawater, aqua regia and iron, copper, sodium and other chloride solutions. It has excellent mechanical properties, can be cut, welded and other machining, large compressive strength, internal pressure destruction strength of up to 2MPa or more; its filtration accuracy is easy to ensure, even when working under high temperature and pressure, the pore size will not be deformed. The porosity is up to 35% to 45%, the pore size distribution is uniform, the dirt holding capacity is large, and the regeneration method is simple, which can be reused after regeneration.
Sintered titanium filter tube is made of industrial high-purity titanium powder (99.4%), which is formed by sieving, cold isostatic pressing, high-temperature and high vacuum sintering. Therefore, with its high-tech material composition and special molding process, the sintered titanium filter tube has unique excellent performance:
Performance and technical index of microporous titanium filter equipment:
| 1. Uniform structure, narrow pore size distribution and high separation efficiency; |
| 2. High porosity, low filtration resistance and high penetration efficiency; |
| 3. High temperature resistance, generally can be used normally below 280 degrees; |
| 4. Good chemical stability, acid and alkali corrosion resistance, and anti-oxidation performance; |
| 5. No particles falling off, no secondary pollution of the original liquid, which meets the requirements of food hygiene and pharmaceutical GMP; |
| 6. It has good mechanical properties, it can be filtered by pressure and suction, and the operation is simple; |
| 7. Low pressure difference, small footprint and large flow; |
| 8. Strong anti-microbial ability, does not interact with microorganisms; |
| 9. The molding process is good, and the overall length without welding can reach 1000 mm; |
| 10. Can be regenerated online, easy to clean, and has a long service life (generally several times the membrane filter element). |
| Grade | T1 | T2 | T3 | T4 | T5 | T6 | T7 | T8 | T9 |
Maximum aperture |
160 | 100 | 60 | 30 | 15 | 10 | 6 | 4 | 2.5 |
Filtration accuracy |
50 |
30 | 20 | 10 | 5 | 2 | 1 | 0.5 | 0.2 |
Breathability |
800 | 500 | 250 | 120 | 40 | 15 | 5 | 3 | 1.5 |
|
Withstand voltage: coil welded pipe |
0.3 | 0.3 | 0.3 | ||||||
|
Withstand voltage: hydrostatic tube |
2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 |
Temperature resistance |
250 | 250 | 250 | 250 | 250 | 250 | 250 | 250 | 250 |
http://www.metal-ti.com/
