Original
By certification 
1.General
1.1 Application This specification is applied to TACT Switch used for electronic equipment.
1.2 Operating temperature range -20℃ ～ +70℃
1.3 Storage temperature -30℃ ～ +80℃
1.4 Test conditions
Ambient temperature 5~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
If any doubt arise from the judgment, tests shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.Appearance construction and dimensions
2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
2.2 Construction and dimensions Refer to individual product drawing.
3. ELECTRICAL SPECIFICATION
NO. |
Items |
Test conditions |
Requirements |
3.1 |
Contact |
Shall be measured at 10mA 5VDC by operations without load. Applied position: Between terminal and terminal |
50mΩ MAX |
3.2 |
Insulation |
Test voltage:100VDC, measured after 1 min ±5s Applied position: 1)Between terminal and terminal 2)Between terminal and ground |
100MΩ MIN |
3.3 |
Dielectric |
Following test voltages shall be applied for 1 min. (Cut-off current:0.5mA) 1)Between terminal and terminal :250VAC (50~60Hz) |
No dielectric breakdown shall occur. |
3.4 |
Contact bounce |
Lightly striking the center of the stem (3 to 4 times per second), and bounce
|
ON-5msec.max OFF-8msec.max |
DRAWING & DIMENSION:
Delivery,shipping and service
FAQ
Q:When can I get the quotation?
A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us so that we will regard your inquiry priority.
Q: Which payment form you can accept?
A: T/T, L/C, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: How many packaging do you have?
A: We have three packages including bag, carton, barrel, usually it is
Q:Would you have a discount if l have a large order?
A:Yes we could offer different discount according to your order quantity.
http://www.switech-china.com/
